Playing With Boats

Well, it’s December 22nd, 2011. The Fiddlehead is done, all my hand tools have been sharpened and tuned up again and I have a couple of weeks off work and some precious free time. What better way to end the year and look ahead to 2012 than to think about what boat I should build next?

Three possibilities have been going through my head for a while. Back in the mid 1990s when I worked at the old Marine Museum of Upper Canada with Peter the Boatbuilder (see last post), we taught a workshop course called “Introduction to Lapstrake Boatbuilding.” The boat we used as the example was Pete Culler’s 13′ lapstrake canoe, a design he called Butternut. This is a lovely little boat, weighing about 35 lbs. We liked it because it showed you everything you needed to know about traditional lapstrake boatbuilding in a nice small package that didn’t go through a whole lot of materials, and was also small enough that we could have two of them underway in the shop at the same time. We told the students it was “the original personal watercraft,” a boat you wear more than use. Here’s one of the completed Butternuts:

As usual with these projects, I didn’t end up with one for myself, so maybe now it’s time? Something this light would also fit on top of Wendy’s little Nissan, and be light enough for her to get up and down easily. Butternut is featured on pp. 23-25 of John Burke’s book Pete Culler’s Boats. The original book is out of print but WoodenBoat have reprinted a catalogue of Culler’s designs. A simple lines plan can be ordered from the Ships’ Plans Department at Mystic Seaport.

Another boat I’ve had in my head even longer than Butternut is the late Bob Baker’s lapstrake canoe Piccolo. He designed this for WoodenBoat back in the magazine’s early days, and a comprehensive how-to-build article appeared in issues no. 36 and 37. It’s an exquisite little sailing canoe, a boat of thoroughgoing charm and modest windward ability (but gentlemen don’t cruise to windward anyways, right?). I liked this boat as soon as I saw her and have always wanted one. Plans are available from The WoodenBoat Store. I’ve gotten as far as lofting Piccolo and starting to pile up some cedar to plank her with (sorry for the grainy photo, hard to take a picture of pencil lines on lofting!):

Two little lapstrake canoes, two worthwhile projects, and eventually I’ll probably build one of each. I’m still thinking about the 16-30 sliding seat canoe, though. One of the ideas I’ve been mulling over is turning the 16-30 into a how-to-build book that also includes some of the history of canoe sailing. I’ve made a couple of false starts on this, but they’ve always come up short. I think one of the things holding me back has been the fact that, much as I love the 16-30 and the sliding seat era of canoe sailing, it was a relatively late development, and isn’t really representative of the whole 1870-1900 era when recreational canoeing first flourished.

An idea came to me in the shower a while ago (often happens there, perhaps the water hitting my head shakes loose a thought?): what about developing another historic canoe design for construction in modern materials that could be a companion to the 16-30? The aims of that project (see the 16-30 page on this blog) were to capture the decked sliding seat canoe sailing experience in a boat that could be built by one person with average tools and skills, in a garage, in a winter, using readily-available parts and materials. Could I find an original design for a cruising sailing canoe that could be adapted the same way? If I did that, then the book could feature these boats as “bookends” exemplifying the range of canoe sailing types, with some history sandwiched in between, and complete plans and building instructions for both.

On to the search for a suitable design. One of the things that made the 16-30 work was that the original boat I was inspired by was a hard-chine hull. I don’t mind turning hard-chine cedar on oak into hard-chine stitch and glue plywood, but I’m not as interested in rendering a round-bottomed hull into a multi-chine stitch and glue boat. Then I came across a design while browsing through Forest & Stream, a treasure trove of canoeing, yachting and other 19th century sporting history. Called Isalo (which is a town in Madagascar, not sure of the connection to canoeing), the boat is a hard-chined hull with a removable sliding seat and two sliding gunter rigs: a cruising outfit of 60 + 18 square feet and a racing rig of 100 + 30 square feet.

This design looks as though it has some potential, so the first step is to do a feasibility study by scaling the design up, re-drawing the lines, generating offsets and thinking about how she might be built. I’ll let you know how it goes.

In the mean time, here’s an interesting development for those interested in the history of small craft. Isalo‘s lines were originally published in The Model Yachtsman and Canoeist, a British magazine which appeared from 1884-1894. It wasn’t what you’d call a mass-circulation piece, so original copies are very hard to find. The Albert Strange Association has just announced that the whole run of 2000 pages has been digitized and made available on two CDs in a searchable pdf format for the very reasonable price of 15 pounds sterling. You can order your copy from the Association’s web site. Perfect Christmas gift for the boating historian on your list.

Best wishes of the season to you all.